Coo-Var Alkali Resisting Primer

Surface Preparation
Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates. Use Coo-Var Masonry Stabiliser on unstable brick, screed or plaster prior to painting. Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate “key” is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.

Mixing Instructions

Mix well before use.

Application Conditions

As dictated by normal good painting practice. Care must be taken during application that the temperature is above the dew point to avoid any contamination. In confined spaces, provide adequate ventilation during application and drying.

Preceding Coat
Apply direct to stable surfaces (see Surface Prep section).

Subsequent Coat
Suitable top coat, such as Pliocem Masonry Paint

Estimated Coverage

10sqm per litre