Product Description
Carboxide Bright Aluminium Paint is a general purpose gloss finish paint for indoor and outdoor use. Carboxide Bright Aluminium Paint is ideal for use on surfaces such as decorative ironwork and wheels. It also works as a solar reflective paint on roofs and as a sealer on surfaces having a moderate coat of bituminous material applied. Carboxide Bright Aluminium can also be used as am alternative to shellac knotting.
Here are some key features:
- Universal Resin-Based Finish: Provides a bright aluminium look.
- Barrier Protection: Offers excellent protection, especially on new or bare timber.
- Multi-Surface Use: Ideal for decorative ironwork, wheels, and even as a solar reflective paint on roofs.
- Sealing Properties: Can be used to seal naturally oily timber, creosote, bituminous, or nicotine-affected surfaces to prevent bleeding
We are a proud member of the British Coatings Federation.
For further help and assistance contact us on 01942 884122 or via the webchat
Preparation:
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Application:
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller.
Ready for spray application by either airless or conventional spray.
A minimum of two coats are recommended.
For application onto wooden surfaces, a minimum of two coats is recommended.
Drying Times:
Surface dry – 3 hours.
Hard dry – 8 hours.
Overcoat after 16 hours.
Drying times will be extended at low temperatures. Do not apply when ambient temperature falls below 10ºC.
Keep coated areas dry for a minimum of 24 hours following application.
Theoretical Coverage: 15m² per litre @ 25µ DFT. Coverage rate can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.
For Thinning and Cleaning use Palatine White Spirit.
Please Note: The colours on the product listings are only given as a guide. This is due to the fact that every computer monitor has a different capability to display colours. In addition, everyone sees these colours differently. Always carry out a test patch (approximately 100x100mm) before full application to ensure compatibility with previous coatings and the substrate, and to ensure the colour achieved meets your requirements. Failure to do so will result in a product refund claim not being accepted.
Reviews
There are no reviews yet.