FREE SHIPPING AVAILABLE ON ORDERS OVER £75.00*
Chemsplash Pro 63 Coverall Type 5/6 – Style No. 2518
The Chemsplash Cat III type 5/6 coverall is made from a strong but breathable 63gsm microporous laminated fabric. Because of it’s high quality and robust nature the product meets the most stringent requirements for a variety of industries.
- Cat 3, Type 5 & 6 accredited
- Ideal for asbestos removal
- Particle & chemical protection
- Ideal for use in wide ranging applications where the operating environment must not be contaminated with garment fibres
- For comfort and ease of fit, a knitted cuff and two way zip has been added
- The zip also has an adhesive cover flap for extra sealing
- Safety Standard: EN13982-1: TYPE 5B, EN13034: TYPE 6B, EN14126: BIOHAZARD, EN1149 -5: ANTI-STATIC, EN1073-2: RADIOACTIVE
£9.13
Stay Social. Connect with us.
Product Description
The Chemsplash Pro Coverall Type 5 & 6 Suit is made from a strong but breathable 63gsm microporous laminated fabric . High quality and robust, this protective Cat III Type 5 & 6 suit meets the most stringent requirements for a variety of industries and uses. These uses include removal of asbestos – see the HSE guidance
Chemsplash Pro fabric is non linting and anti-static to EN 1149-5 2008. Perfect where the operating environment must not be contaminated with garment fibres.
Ideal for use in:
- Pharmaceutical Industries
- Agriculture
- Cleanrooms
- General Paint Spraying
- Veterinary Services
For comfort and ease of fit, a knitted cuff and two way zip has been added, and the zip also has an adhesive cover flap for extra sealing. Choose a size that will allow for movement without putting pressure on the seams, a size guide is included below.
The Chemsplash Cat III type 5/6 coverall meets ENISO 14644-1 Class 5, ISO 5 CLASS refers to the number of particles per cubic meter in a cleanroom or cabinet and the linting test (ISO9073-10) refers to the number of particles released from the fabric in test conditions. The requirement(EN13795)for the compliance of fabric linting is < 3.5 and cleanliness-particulate matter <4.
Product Documents
Downloads
Surface Preparation
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
The preparation of steelwork prior to painting generally falls into two main areas; that of degreasing and the removal of rust and scale.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Fast Dry etching primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Mixing
Stir the paint with a drill stirrer or wooden baton at least 2” wide. Continue to stir during application.
Application
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
If using more than one batch of the same colour, intermix before use
Preceding Coat
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Mordant Solution.
Subsequent Coat
A second coat is recommended for maximum protection.
Be the first to review “Chemsplash Pro 63 Coverall Type 5/6 – Style No. 2518”
Reviews
There are no reviews yet.