FREE SHIPPING AVAILABLE ON ORDERS OVER £75.00*
Palatine Professional Wood Paint
Palatine professional Interior Wood Paint is a durable internal top coat for indoor wood, specifically skirting boards and doors, available in a range of colours including white and grey. If you’re looking for a slight shine then satin is the perfect choice or just a simple gloss.
- Suitable for Doors, doorframes and skirting board and other interior woodwork.
£12.72 – £55.07
Stay Social. Connect with us.Â
Product Description
Palatine Professional Interior Wood Paint is the product your looking for! Formulated as a decorative paint, an oil based paint which gives a durable, quick drying, protective finish paint for indoor wood in white, grey, blue and more.
Available in Gloss or Satin finish: satin means it will reflect some light but will not have a high gloss finish. Palatine Professional interior decorative wood paint is an all-rounder!
- Provides a durable long-lasting finish.
- Suitable for Doors, doorframes and skirting board.
- Satin/Eggshell & gloss finish for easy wipeable clean
- Perfect choice of paint for touching up on them old dated living room doors or just fancying a change.
- Palatine Professional wood paint is touch dry in 3 hours, providing excellent wet edge and flow out.
- Available in the highly popular Anthracite Grey RAL 7016
- Can’t find the colour you’re wanting? We can also match to RAL Classic or BS381c/Bs4800 colours
Colours Available: 26 Standard, BS 381C, BS4800 and Ral Classic range.
Pack Sizes: 500ml, 1 Litre, 2.5 Litre, 5 Litre.
Coverage / Drying Times:
Surface Dry: 3 hours
Hard Dry: 8 hours
Overcoat: after 24 hours
Keep coated areas dry for a minimum of 24 hours following application.
Please note, drying times will be extended at low temperatures. Do not apply when ambient temperature falls below 10ºC
Theoretical Coverage: 12 – 14m² per litre.
(Coverage rate can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.)
Preparation:
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
for a better finish, prime surfaces with Palatine All Purpose Primer / Undercoat in accordance with our recommendations
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Application:
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
If using more than one batch of the same colour, intermix before use
TAMAS –
Fantastic service really pleased with product
Eleanor Flynn –
I am amazed with the results! Will Definitely order this again to do our upstairs. I went with satin RAL 7016.