Stay Social. Connect with us. 

We accept most major credit/debit cards and e-wallets

Coo-Var Anti-Slip Step & Ramp Paint

(1 customer review)

A water based paint that provides a durable and hard wearing finish to the surface as well as an anti-slip finish.

  • For Interior and Exterior use
  • Suitable for Wood, Stone, Concrete, Tarmac, Brickwork and suitably prepared Metal
  • Apply by Brush or Roller
  • Matt Finish

£20.02

Clear


access-blue
tile-red
black
clear
grey
yellow

Product Description

Coo-Var Anti-Slip Step & Ramp Paint is a water based paint for use on steps and ramps. It provides a durable and hard wearing finish to the surface, as well as an anti-slip finish that makes the surface low risk in wet and dry conditions.

This paint is ideal for raised entrances, where steps and ramps are used often and are exposed to the weather. The anti-slip texture makes these areas safer to use in wet conditions. The range of brighter colours can be used to mark the edges of steps or other potentially hazardous areas. The paint is also available in grey and black in order to compliment concrete surfaces.

Touch dry in 1 hour and hard dry in 2 hours. Leave 6 hours before overcoating.

Apply by Brush or Roller

For full details, please see the datasheets or contact us via the online chat, phone or email for any questions about this item or to check stock.

Surface Preparation

All surfaces should be clean, dry, sound and free from contaminants. Concrete – power floated, granolithic and smooth surfaces should be roughened first to provide a good “key” for the paint. This can be done mechanically by abrading or blasting, or chemically, using Coo-Var Acid Etch.

These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance. New concrete must be allowed to cure thoroughly which can take up to 3 months. Other surfaces have to be prepared and primed with the suitable primer for that substrate.

Existing painted surfaces – Surfaces should be cleaned, degreased and sanded to ensure an adequate “key” is produced. Remove all loose and flaking material and treat bare areas as new substrate and prepare.

Mixing Instructions

Mix well before use.

Application Conditions

As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying. Do not paint when temperature will be at or below 7 °C during the painting and drying process.

Preceding Coat

Apply direct to wood, Coo-Var All Metals Primer or Palatine Metal Primer on Metal, Coo-Var Anti-Slip Step & Ramp Paint thinned 5% with clean water on all other unpainted surfaces.

Subsequent Coat

Coo-Var Anti-Slip Step & Ramp Paint

Remarks

Do not paint when temperature will be at or below 7 °C during the painting and drying process.

Estimated Coverage

5-9sqm per litre

1 review for Coo-Var Anti-Slip Step & Ramp Paint

  1. Ian

    I would recommend this paint. It covered well in two coats and was much nicer to work with than a solvent-based floor paint. I like the matt finish. After a couple of months of being walked on, it is still firmly stuck to my concrete doorstep with no obvious signs of wear, so fingers crossed for the longer term.

Add a review

You may also like…

£18.75£91.53
£18.75£22.22

Coo-Var Step and Ramp Paint
Coo-Var Anti-Slip Step & Ramp Paint
£20.02 Select options
This site uses cookies to offer you a better browsing experience. By browsing this website, you agree to our use of cookies.