Palatine Plant & Machinery Paint Gloss

(1 customer review)

Plant & Machinery Paint is a high gloss solvent-borne coating designed for use on a wide range of plant, machinery and equipment.

  • Ideal for use as a refurbishment or maintenance coating on machinery, plant, moveable equipment, and construction equipment
  • Provides durable long term protection.
  • Touch dry in 2 hours
  • Best applied by brush or roller but can also be sprayed.
  • Facility to colour match to either BS4800, BS381c and RAL colour codes




Stay Social. Connect with us. 

Palatine Plant & Machinery Paint Gloss, is a protective finish, industrial top coat for interior and exterior use. It gives your surface long term, durable protection. If you’re looking for a high quality finish then this paint is a great choice. It is suitable for wood, metal and many other surfaces. This makes it ideal for a wide range of plant, equipment and machinery.

Use on structural steelwork, machinery, railings, pipework.

You can use Plant & Machinery Paint Enamel Gloss Topcoat over our Plant & Machinery Primer. You can also apply it over previously painted surfaces. It is best applied by brush or roller, but it can also be sprayed (when diluted with no more than 10% of white spirit).

This high gloss single pack topcoat is popular among a wide range of plant hire companies and is ideal for touching up and refurbishing your plant and equipment to ensure it always looks in the best condition.

For interior and exterior use. Based on vinyl toluene modified alkyd resin, (lead free) containing organic and inorganic pigments.

The correct solvent for thinning and cleaning for this product is Palatine White Spirit

Please note: The colours shown here are only a guide. This is due to the fact that every computer monitor has a different capability to display colours. In addition, everyone sees these colours differently.

Colours Available: BS 381C, BS4800 and Ral Classic range.

Pack Sizes: 1 Litre, 2.5 Litre, 5 Litre, 20 Litre

Coverage / Drying Times:

Surface Dry: 2 hours

Hard Dry: 8 hours

Overcoat: after 24 hours
Keep coated areas dry for a minimum of 24 hours following application.
Please note, drying times will be extended at low temperatures. Do not apply when ambient temperature falls below 10ºC

Theoretical Coverage: 12 – 14m² per litre.

(Coverage rate can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.)


Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.

The preparation of steelwork prior to painting generally falls into two main areas; that of degreasing and the removal of rust and scale.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Fast Dry etching primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.


Best results are obtained in warm (minimum 10°C), dry conditions.

Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces

For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.

Thinning and Cleaning: Use Palatine White Spirit.

If using more than one batch of the same colour, intermix before use

Product Documents

1 review for Palatine Plant & Machinery Paint Gloss

  1. Warrington Self Storage

    Brilliant paint, we have painted one of our blue containers green. One coat of paint and the container looks brand new.

Add a review

You may also like…

Garden Furniture Paint

Low Odour White Spirit – Carbosolv


Palatine Plant & Machinery Paint Enamel Gloss Golden Yellow 5L
Palatine Plant & Machinery Paint Gloss
£11.54£85.61 Select options
This site uses cookies to offer you a better browsing experience. By browsing this website, you agree to our use of cookies.