FREE SHIPPING AVAILABLE ON ORDERS OVER £75.00*
Decking Oil Grey – Carbodeck UV Complete Colours
Carbodeck UV Complete Decking Oil Grey has been specially formulated with a rich, flexible resin to prevent blistering and flaking.
- Contains unique UV absorbers to protect from harmful sun rays.
- Deep penetrating to protect the surface.
- Universal complete deck oil for porous wood and composite surfaces.
£25.16 – £40.84
Stay Social. Connect with us.
Product Description
Carbodeck UV Complete Decking Oil Grey has a rich, flexible resin that prevents blistering and flaking. Containing unique UV absorbers that protect the surface and prevent harmful damage to the surface. The penetrating oils soak deep into the wood which helps to prevent twisting and cracking.
For use on new and suitably prepared softwood and hardwood decking boards, spindles and handrails. Compatible with weathered composite decking boards. A test area recommended.
When applied directly onto new or clean, porous surfaces, the oils penetrate deep into the surface. Older deck boards or non pressure treated, require a base coat of Barrettine Universal Wood Preservative for maximum performance. If the deck boards have mould, algae or mildew, treat and remove with Barrettine Super Concentrated Decking Cleaner
Touch dry in 3 hours and Hard dry in 12 hours. Leave 12 hours before overcoating.
Theoretical coverage: 13.6m² per litre
Colour swatch images are for guidance only.
Product Documents
Surface Preparation
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
The preparation of steelwork prior to painting generally falls into two main areas; that of degreasing and the removal of rust and scale.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Fast Dry etching primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Mixing
Stir the paint with a drill stirrer or wooden baton at least 2” wide. Continue to stir during application.
Application
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
If using more than one batch of the same colour, intermix before use
Preceding Coat
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Mordant Solution.
Subsequent Coat
A second coat is recommended for maximum protection.
1 review for Decking Oil Grey – Carbodeck UV Complete Colours
Add a review
Belinda Darnell –
Called to order samples which arrived super quick Thank you.
Comparing them to Osmo with similar colours and have chosen to go with the Carbodeck as the quality and colour seemed to match but Carbodeck are much cheaper.