Product Description
Coo-Var Anti-Slip Acrylic Floor Paint is a water-based, smooth matt finish paint designed for both interior and exterior use. It provides a durable and hardwearing surface with an anti-slip finish. Suitable for various surfaces, including wood, concrete, tarmac, stone, and brickwork. This paint is low odor, fast-drying, and self-priming. Tested to BS7976-2, it offers low risk in wet and dry conditions. Ideal for enhancing safety and appearance. The coating is hard wearing and is suitable for a variety of surfaces, useful if additional safety measures are required in an exterior area.
Touch dry in 1 hour and hard dry in 2 hours. Leave 6 hours before overcoating.
For full details, please see the datasheets or contact us via the online chat, phone or email for any questions about this item or to check stock.
Surface Preparation
All surfaces should be clean, dry, sound and free from contaminants. Concrete – power floated, granolithic and smooth surfaces should be roughened first to provide a good “key” for the paint. This can be done mechanically by abrading or blasting, or chemically, using Coo-Var Acid Etch. These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance.
New concrete must be allowed to cure thoroughly which can take up to 3 months. Other surfaces have to be prepared and primed with the suitable primer for that substrate.
Existing painted surfaces – clean, degrease and sand the surface to ensure an adequate “key”. Remove all loose and flaking material and treat bare areas as a new surface.
Mixing Instructions
Mix well before use.
Application Conditions
As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying. Do not paint when temperature will be at or below 7 °C during the painting and drying process.
Preceding Coat
Apply direct to wood, Coo-Var All Metals Primer or Palatine Metal Primer on Metal, Coo-Var Anti-Slip Acrylic Floor Paint
thinned 5% with clean water on all other unpainted surfaces.
Subsequent Coat
Coo-Var Anti-Slip Acrylic Floor Paint
Remarks
Do not paint when temperature will be at or below 7 °C during the painting and drying process. PTV Results 68 Dry – Low Risk, 58 Wet – Low Risk. These products have been independently tested under laboratory conditions.
A site assessment is an important component in determining the slip risk of any given floor; the environment, contamination substances, types of footwear and likely pedestrian behaviour can all affect the actual figures achieved during application. An onsite verification may be necessary to determine actual values.
Estimated Coverage
5-9sqm per litre
Reviews
There are no reviews yet.