Coo-Var Glocote Fluorescent Foundation Base

Surface Preparation
All surfaces should be clean, dry, sound and free from contaminants. New wood should be sanded prior to coating to ensure an adequate “key” is produced.
Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate “key” is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.

Mixing Instructions

Mix well before use.

Application Conditions

As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying

Preceding Coat

Direct on wood and masonry, use a Zinc Phoshpate Primer on Metal.

Subsequent Coat

Coo-Var Glocote Fluorescent Paint

Remarks

For use under Coo-Var Glocote Fluorescent Paint.

Estimated Coverage

13sqm per litre