Stay Social. Connect with us. 

We accept most major credit/debit cards and e-wallets

Epoxytread Solvent Free Two Pack Epoxy Floor Primer

Epoxytread Solvent Free Two Pack Epoxy Floor Primer for priming before applying Epoxytread Solvent Free High Build Floor Paint.

  • Low viscosity = easy application
  • Excellent adhesion to a variety of substrates
  • Great “wetting out” and penetration properties
  • Low odour = suitable for use in food factories
  • Good curing performance at low temperatures
  • Container Size: 4.5kg

£67.67£73.82

Clear


admiralty-grey
light-grey
mid-grey
tile-red

Epoxytread Solvent Free Two Pack Epoxy Floor Primer is designed for priming before applying Epoxytread Solvent Free High Build Floor Paint.  Epoxytread 2k primer is based on a blend of epoxy resin and curing agent binder. This gives the low viscosity necessary to wet the substrate and enable good penetration.

Designed for use on a variety of surfaces including concrete and masonry.  Comes in a gloss finish. Use a floor primer if your floor is in poor condition or is concrete that has not been previously painted or matured.

  • Low viscosity means easy application
  • Excellent adhesion to a variety of surfaces
  • Great “wetting out” and penetration properties
  • Low odour means it is ideal for use in food factories
  • Good curing performance at low temperatures

Need more information about epoxy floor paints or not sure which coating you need? Ask Jeff – has some information We also have a blog explaining which paints to use on concrete and wooden floors

Container Size: 4.5kg

ghs09 ghs 07

TECHNICAL DATA

Mixed viscosity of binder @ 25°C – Poise 3 – 6
Minimum application temperature ° C 5
Usable time (1.0kg mix) @ 20°C 35 – 40 minutes (Fast Cure – 20 minutes)

Epoxytread Solvent Free Primer is supplied in 4.50kg units.

(Approximate coverage is 25m² per 5.0kg unit).

(Coverage rate can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.)

Surface preparation

New concrete should be at least 21 – 28 days old or the moisture content less than 5%.
The substrate should be clean, free from laitance, oil, grease or other agents which may impair adhesion.

Techniques should include (depending on degree of contamination) acid etching, light mechanical scabbling, blasting, grinding or degreasing.

Existing concrete floors should be sound, preparation methods may involve the patching of floor areas with Epoxytread Patch Repair System.

Epoxytread Solvent Free Primer is applied to the prepared substrates by roller or brush, ensuring a continuous film. Avoid over-application and puddles. Porous floors may require two coats.

MIXING

Epoxytread Solvent Free Primer is supplied in pre-weighed packs. Add all the contents of Curing Agent Component B to Epoxy Resin Component A and mix thoroughly. Once mixed the primer should be immediately applied. Epoxytread Solvent Free Primer should be allowed to become tack free prior to the application of Epoxytread Self-levelling Flooring System No 2 and Epoxytread Solvent Free Coating.

CLEANING

Epoxytread Tool Cleaning Solvent should be used to clean tools – do not use on hands.

Reviews

There are no reviews yet.

Be the first to review “Epoxytread Solvent Free Two Pack Epoxy Floor Primer”

You may also like…

£21.03£159.20

2K Epoxy Primer
Epoxytread Solvent Free Two Pack Epoxy Floor Primer
£67.67£73.82 Select options
This site uses cookies to offer you a better browsing experience. By browsing this website, you agree to our use of cookies.